Programmable incremental optical hollow shaft encoder user-programmable from 1 up to 65536 PPR
- Counting direction: can be set by user;
- Zero pulse: the position can be defined by the user through a pushbutton on the encoder housing
- Output voltage: selectable by user
- Encoder programming: by means of the classical RS232 serial port or simple USB to RS232 adapter (no need for custom expensive adapters)
- Body diameter (mm) 58
- Blind shaft diameter(mm) 6,8,9.52,10,11,12,12.7,14,15 (reducing bushing except 15 mm)
- Resolution (PPR) max 65536
- Interface LD2, PP2
NOTE: for programmable incremental encoders with a cable output we suggest to use the standard programming cable TISP581PRGCBL.20 with an auxiliary connector-to-cable adapter – the new code will be TISP581PRGCBL.20.XC24
MAIN ADVANTAGES:
- Warehouse optimization – Ideal solution for different applications that require one single encoder model means one mechanical setup with different resolutions.
- Lead times reduction – greater timeliness in maintenance services with a costs related reduction
- Costs reduction for downtime – time to configure the encoder up to your needs, have a single model for different applications.
- Easier procedure for setting the zero set for the equipment – zero pulse position can be set directly by the user.
MECHANICAL SPECIFICATIONS
- Dimensions : see drawings
- Shaft : stainless steel
- Shaft loading : axial 100N; radial 100N
- Shaft Rotational Speed : 10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM with protection shaft
- Starting torque a 25° C : 0,025 Nm; 0,040 Nm whit shaft proof
- Moment of inertia : 40g cm²
- Bearings life : 5 x 10^9 revolutions (minimum)
- Weight : ~ 0,3 kg
ELECTRICAL SPECIFICATIONS
- Resolution : programmable from 1 to 65536 ppr
- Output frequency : up to 300 kHz
- Index pulse positioning : index position freely settable by user
- Programmable counting : direction user selectable (CW or CCW)/
- Power consumption : < 500 mW (without load)
- Protection : short circuit and inversion of polarity protection
MATERIALS
- Flange : aluminium non corroding
- Housing : Polyamid 6 (PA6), metallic on request.
ENVIRONMENTAL SPECIFICATIONS
- Operating temperature range : -25°C ÷ +85°C (100° C on demand)
- Storage temperature range : -25°C ÷ +85°C
- Relative humidity : 98% RH without condensing
- Vibrations : 10 g (from 10 up to 2.000 Hz)
- Schock : 20 g (for 11 ms)
Download Pdf :
DataSheet
